Distribution 2020

Marine varnish - interior/exterior - Blanchon

Format
SKU: FVERNISMARINBRIL01
Minus Plus
55,95 $CAD

Blanchon Marine Varnish is recommended for varnishing woodwork subject to the marine climate and bad weather. Its water-based polyurethane resins contain a highly effective anti-UV agent. Marine Varnish delivers outstanding results in the harshest weather conditions, on exterior doors and windows, boat decks and overhead work, trim and all other woodwork exposed to moisture. Ground application is possible in light traffic.

Unlike other water-based varnishes, it does not mask the grain of the wood and does not produce any whitish effect. It can be applied to all types of wood and has the property of retaining their natural colours. Its milky color when applied fades completely when drying.

  • Scentless ;
  • High resistance to marine climate;
  • Very resistant to abrasion, shocks and scratches;
  • Colorless and resistant;
  • Does not yellow;
  • Does not flow ;
  • Contains a powerful anti-UV agent;
  • Exterior and interior.

Preparation :

The wood should be clean and free of all traces of old varnish, oil, wax or other finishing products. Sand the wood ending with 120 grit sandpaper and carefully remove the dust. Fill the cracks with the Mastic Bois tube from Blanchon. Dye as needed following the recommended instructions.

Shake the container vigorously and let stand 20 minutes before application.

Acclimate the product to an ambient temperature above 15°C.

Application :

Apply the varnish in the direction of the grain of the wood with an SRT polyester or poly/nylon brush. Between coats, leave to dry for 3 hours and sand with 180 paper.

If you want to apply it on a walnut husk , seal the surface with a shellac-based primer (50 g of shellac in 500 ml of denatured alcohol).

Number of layers:

  • Exterior: 3 coats or 4 coats on particularly absorbent wood or on works subjected to severe climatic conditions.
  • Interior: apply 2 coats.

Drying time :

  • To the touch: 1 hour
  • Between coats: after 3 hours and before 48 hours
  • Light traffic: 12 hours
  • Use: 24 hours
  • Complete drying: 48 hours

Compatibility:

Vernis Marin de Blanchon can be applied on bare wood, on wood stained with our Tandem-1 oil-based stain from Ligna or most non-sealing water-based, alcohol-based or oil-based stains.

Interview :

The Vernis Marin de Blanchon refreshes easily. Sand with 180 sandpaper to make it matt, dust off and apply two coats of Marine Varnish.

Areas covered:

125 sq . ft. per liter

Finished :

Bright

More details Right